Home / Products

Product catalogue

Specifications below are typical supply ranges used on our projects. Final models are confirmed after a site survey. Filter the grid, then scroll into full detail sheets.

Extinguishers

Signage kit

Extinguishers

ABC dry powder extinguisher

Multi-purpose stored-pressure extinguisher for ordinary combustibles, flammable liquids, and energized electrical equipment at a safe distance. Standard issue for offices, stores, and plant corridors.

Capacities	1 kg, 2 kg, 4 kg, 6 kg, 9 kg
Agent	Monoammonium phosphate (ABC)
Certification	ISI marked · typical IS 15683 range
Service	Annual refill, 5-year hydrostatic test window
Best for	Warehouses, parking, general industry

Request this model

Extinguishers

CO2 extinguisher

Clean, non-conductive discharge for electrical rooms, CNC cells, and panel boards. Leaves no powder residue on sensitive equipment.

Capacities	2 kg, 4.5 kg, 6.5 kg, 9 kg, 22.5 kg trolley
Agent	Carbon dioxide
Horn	Frost-protected discharge horn
Use class	B and electrically energized fires
Caution	Ventilate after discharge; asphyxiation risk in small rooms

Request this model

Extinguishers

AFFF foam extinguisher

Aqueous film-forming foam for hydrocarbon spill risk: diesel yards, paint stores, and loading bays. Forms a vapour-sealing blanket on liquid surfaces.

Capacities	6 L, 9 L portable · 50 L trolley
Concentrate	AFFF 3% / 6% as specified
Not for	Energized electrical equipment unless rated
Pair with	Spill kits and drain isolation

Request this model

Detection

Modular photoelectric smoke detector

Low-profile optical detector for offices, hotels, and residential towers. Compatible with conventional and addressable panels we commission on site.

Sensing	Photoelectric chamber
Profile	Low-profile ceiling mount
Wiring	2-wire / 4-wire as per panel
Options	Sounder base, remote LED, isolator
Maintenance	Annual sensitivity check, chamber clean

Request this model

Detection

Rate-of-rise / fixed heat detector

Used where smoke detectors would nuisance-alarm: kitchens (beyond hoods), boiler rooms, dusty shops, and parking ramps.

Modes	Fixed temperature and rate-of-rise
Typical set point	57°C / 80°C class as designed
Environment	Higher humidity and airborne dust
Loop	Same panel as smoke and MCP

Request this model

Detection

Fire alarm control panel

Conventional or addressable FACP with zone LEDs, battery backup, and outputs for sounders, strobes, and HVAC shutdown.

Types	2–32 zone conventional · addressable loops
Standby	Sealed batteries sized to code
Outputs	NAC, relays, BMS / EMS interface
Handover	Cause-and-effect matrix + as-built

Request this model

Suppression

Clean agent gas suppression

Total-flood systems for server rooms, UPS rooms, and archives. Designed around enclosure integrity, nozzle layout, and abort/release stations.

Agents	FM-200 / Novec 1230 class (project specific)
Detection	Cross-zoned smoke, pre-discharge tone
Cylinders	Stored in dedicated plant with weigh check
Tests	Room integrity / door fan as specified

Request this model

Suppression

Kitchen wet chemical system

Hood, plenum, and duct nozzles with fuel shut-off. Suited to hotels, cloud kitchens, and industrial canteens.

Agent	Wet chemical, Class K / F cooking oils
Actuation	Automatic fusible links + manual pull
Interlock	Gas / electric appliance shut-off
Service	Semi-annual inspection typical

Request this model

Suppression

Sprinkler heads & alarm valves

Pendent, upright, and sidewall heads with wet or dry alarm valves for warehouses and office towers.

Temps	Ordinary, intermediate, high as hazard class
K-factor	Selected per hydraulic calculation
Coverage	OH1–OH3 / storage as designed
Water	Tank + pump set sized to demand

Request this model